Filter
Top Products
119
When you bought your vehicle, you were given a
computer code that operates the system for your
vehicle. For your convenience, we have duplicated
this code in three places.
The code is:
❑
on your owner’s wallet card found in the glove
compartment
❑
taped to the right hinge of the trunk lid
❑
taped to the computer module inside the
driver’s door panel
When you use keyless entry, the illuminated entry
system turns on the interior lights for 25 seconds
and the buttons on the keypad light up. Do not
push the buttons with a key, ballpoint pen, pencil,
or any other hard object. These objects could
damage the buttons.
Unlocking the Doors with the Keyless
Entry System
You must unlock the driver’s door before you
unlock any of the other doors or trunk. If you let
more than five (5) seconds pass before pressing
numbers, the system shuts down, and you have to
enter the code again. The system has shut down if
the keypad light is out. If the keyless entry system
does not work properly, use the key or
transmitter(s) to lock and unlock the doors or
unlock the trunk.
1. To unlock the driver’s door, enter the factory
code or your personal code. All codes have five
(5) numbers. After you press the fifth number,
the driver’s door unlocks.
2. To unlock the passenger’s door, press the 3/4
button within five seconds of unlocking the
driver’s door or trunk, or re-enter the code to
open the driver’s door, then press 3/4.
File:05fncf8.ex
Update:Thu Jun 27 10:02:20 1996