Filter
Top Products
130
Spare Key Programming Procedure
Two electronically coded keys were supplied with
your vehicle, use one of these with the procedure
below:
❑
Using a coded key that you can start your
engine with, turn the ignition from the ON to
the OFF position.
❑
Within 15 seconds, insert a new key into the
ignition and turn it to ON or START. The
vehicle does not have to be started.
If the key has been coded, the theft indicator will
illuminate for two seconds. The key can then be
used to start the vehicle.
Repeat until all chosen keys have been coded
(max=8).
If the key coding failed, the theft indicator will flash
and the vehicle cannot be started. One of 3 causes
are possible:
❑
The new key was not inserted within 15
seconds or
❑
All 8 key codes have been stored or
❑
The key does not have an electronic code
File:05fncf8.ex
Update:Thu Jun 27 10:02:20 1996