Filter
Top Products
27
ț Press DATE/TIME repeatedly to select the
correct month of the year.
ț Then press RESET to proceed to the date
adjustment display.
ț Press DATE/TIME repeatedly to select the
correct day of the month.
ț Then press RESET to complete the
set/adjustment procedure.
❑
Time Only Display — A second press of the
DATE/TIME control displays the Time Only
Display. From this display Time of Day can be
set/adjusted if desired. The display will give
instruction to help aid with the process. If the
set/adjustment procedure is started and nothing
is pressed for a minute, the Message Center will
exit the procedure automatically with the
currently selected Time.
ț To set/adjust the hour, press the RESET
control.
ț Press DATE/TIME repeatedly to select the
correct hour. (Note: A = AM/P = PM)
ț Then press RESET to proceed to the minute
adjustment display.
ț Press DATE/TIME repeatedly to select the
correct minute.
ț Then press RESET to complete the
set/adjustment procedure.
❑
Elapsed Time Display — A third press of the
DATE/TIME control displays the Elapsed Time
Display. This feature allows the operator to
monitor elapsed time if desired. The Elapsed
Time continues to run regardless if the vehicle
ignition is ON or OFF.
ț To STOP the Elapsed Time count while it is
running without resetting the counter, briefly
press the reset control for less than 2
seconds.
File:03fnis8.ex
Update:Thu Jun 27 10:00:37 1996