Filter
Top Products
78
Controls in detail
Lighting
3
̈ Turn key to position 1 in ignition lock
(୴ page 67).
̈ Turn light switch to B.
̈ Press combination switch forward 1.
The indicator lamp A in the instru-
ment cluster lights up.
Headlamp flasher
̈ Turn key to position 1 in ignition lock
(୴ page 67).
̈ Pull combination switch briefly in
direction 2.
Constant headlamp mode*
On vehicles with steering wheel buttons,
you can set constant headlamp mode
(୴ page 102). This does not apply to coun-
tries in which there is a legal requirement
to use constant headlamp mode.
̈ Turn light switch to M.
The low-beam headlamps, parking
lamps and license plate lamp are
switched on when the engine is
running.
The B indicator lamp in the instru-
ment cluster lights up.
Automatic headlamp control*
The parking lamps, low-beam headlamps
and license plate lamp are switched on au-
tomatically when the brightness of ambi-
ent light falls below a predetermined level.
̈ Turn light switch to U.
The parking lamps are switched on/off
automatically when the key is in posi-
tion 1 (୴ page 67) in the ignition lock.
The parking lamps, low-beam head-
lamps and license plate lamp are
switched on/off automatically when
the engine is running, depending on the
ambient light conditions.
Only use manual headlamp mode when
you are driving in countries where driving
with the low-beam headlamps switched on
is required by law.
̈ In this case, turn the light switch to
B.
Warning G
If the light switch is at U:
ț the headlamps could switch off tempo-
rarily due to extreme glare, e.g. from on-
coming traffic
ț the lights do not switch on automatically
in foggy conditions
Set the light switch to B. Otherwise you
are endangering yourself and others.
If it is dark, only turn the light switch from
U to B when the vehicle is stationary.
You could otherwise cause an accident if the
headlamps were to switch off briefly.
Automatic headlamp mode is only a driving
aid. You are responsible for the vehicle’s
lighting at all times.