Filter
Top Products
135
Controls in detail
Tempmatic
3
The indicator lamp in the switch comes
on.
̈ Turn airflow control 2 (୴ page 131)
to a higher blower speed, but do not
turn the control below second speed.
̈ Turn temperature selector control 1
(୴ page 131) to a higher temperature.
̈ Turn air distribution control 5
to ‚ P.
̈ Close the center air vents and the air
outlets for the head area and the rear
compartment.
̈ Open the side air vents and direct them
at the side windows.
̈ If the windshield is fogged up on the
outside, switch on the windshield wip-
ers (୴ page 126).
Defrosting
The following settings can be used to clear
the windshield and the side windows, e.g.
if covered with frost.
̈ Set temperature selector control 1 to
P.
̈ Turn airflow control 2 to fourth speed.
̈ Turn air distribution control 5
to ‚ P.
̈ Close the center air vents and the air
vents for the head area and the rear
compartment.
̈ Open the side air vents fully.
1 Side window defroster vent thumb-
wheel
̈ Turn side window defroster vent
thumbwheel 1 all the way up.
The defroster vent is open if the
defroster vent is visible.