Filter
Top Products
143
Controls in detail
Auxiliary heating/ventilation*
3
̈ Press the è button.
The switch-on time is selected.
The yellow indicator lamp in the ö
switch comes on.
Setting the switch-on time
Operating system without steering
wheel buttons
̈ Select a switch-on time as described
under “Selecting a switch-on time”
(୴ page 142).
̈ Press the reset button on the instru-
ment cluster to set the selected switch-
on time.
The hours figure flashes and the ”
symbol appears in the display.
̈ Set the hours using the or am
button on the instrument cluster.
̈ Press the reset button.
The minute display flashes.
̈ Set the minutes using the or
button.
Operating system with steering wheel
buttons
̈ Select a switch-on time as described
under “Selecting a switch-on time”
(୴ page 142).
̈ Press the j button.
The
Hours
menu appears in the display.
̈ Set the hours using the æ or ç
button.
̈ Press the j button.
The
Minutes
menu appears in the dis-
play.
̈ Set the minutes using the æ
or ç button.
̈ Press the è button.
The switch-on time is set and selected.
i
If you turn the key to position 0 in the
ignition lock, the yellow indicator lamp
in the ö switch goes out after
30 minutes.
The red indicator lamp in the ö
switch comes on when the auxiliary
heating switches on.
i
If you keep the button pressed, the val-
ues will change continuously.
To return to the standard display:
ț press and hold the button on
the instrument cluster for more
than 1 second
ț do not press a button for
10 seconds
i
To return to the standard display, press
the è or ÿ button repeatedly
until the standard display appears.