Filter
Top Products
72
Controls in detail
Seats
3
Positioning the seat cushion
̈ Fold the seat cushion back.
̈ Slide the seat cushion under the back-
rest and into rear anchorage 2.
̈ Fold the seat cushion down.
̈ Press the front of the seat cushion
down until it engages in front
anchorage 1.
1 To fold up the armrest
2 To unlock the armrest
3 To move the armrest to the desired po-
sition
Adjusting the armrest angle
̈ Fold the armrest up by an angle of
more than 45° to unlock it 2.
̈ Fold the armrest forward to the
stop 3. There are six closely spaced
positions in which the armrest can en-
gage if you raise it.
Folding up the armrest
̈ If you do not wish to use the armrest,
fold it up by an angle of more than
90° 1.
Adjusting the head restraint
1 Release button
2 Height adjustment
3 Angle adjustment (comfort head re-
straint)
̈ To raise: pull the head restraint up to
the desired position.
̈ To lower: press release button 1 and
slide the head restraint down to the de-
sired position.
̈ To adjust the angle: hold the head re-
straint by the lower edge and fold it to
the desired position.
Armrests*
Head restraints
Warning G
Only drive with the head restraints installed. You
could otherwise suffer serious or fatal injuries in
the area of the upper spinal column.
Adjust the head restraint in such a way that the
upper edge of the head restraint is level with
your head.
Adjust your head restraint so that when your
head is relaxed the back of your head is as close
as possible to the head restraint. This will sup-
port your head effectively in an accident. The
head restraint must be engaged in a detent.