Dodge 2007 Sprinter Automobile User Manual


 
71
Controls in detail
Seats
3
The seat release lever is located behind the
seat between the seat backrest and the
seat base.
Co-driver’s seat
̈ Press lever 1 on the back of the seat
to the middle and turn the seat slightly
inwards.
̈ The turning device is unlocked.
̈ Release lever 1 again.
̈ Turn the seat inwards to the desired
position.
Twin co-driver's seat*
Folding the seat cushion forward
1 To release from the front anchorage
2 To release from the rear anchorage
̈ Lift the seat cushion out of front
anchorage 1.
̈ Pull the seat cushion towards the front
slightly and out of rear anchorage 2.
̈ Fold the seat cushion up by the rear
edge.
1 Lever
Warning G
You could knock yourself against the unpro-
tected pivoting frame if the seat is opposite
of the direction of travel and pushed right
back in a longitudinal direction.
Therefore, center the seat above the seat
base whenever you leave it. Point out this
danger to passengers.
i
The twin co-driver’s seat does not pro-
vide the same level of comfort as the
driver’s and co-driver’s seats.
There is only restricted seat width and
legroom.
i
You can store various articles in the
space under the twin co-driver’s seat.