Filter
Top Products
106
Controls in detail
Operating system with steering wheel buttons*
3
̈ Press the æ or ç button to
switch key dependence
On
or
Off
.
The Trip computer menu displays statisti-
cal data for your vehicle.
Consumption statistics after start
̈ Press the è or ÿ button repeat-
edly until you see the
After start
mes-
sage in the display.
1 Distance driven since start
2 Time elapsed since start
3 Average speed since start
4 Average fuel consumption since start
i
For safety reasons, it is not possible to
set the
Key
function while the vehicle is
in motion. You will see the following
message in the display:
Setting only
possible at standstill
.
Trip computer menu
Function Page
Consumption statistics after
start
106
Consumption statistics after re-
set
107
Reset consumption statistics 107
i
When you call up the trip computer
again, it always displays the consump-
tion statistics after start first.
The units of the trip computer are coun-
try-specific and depend on the setting
in the
Instrument
submenu of the
Set-
tings
menu.
i
If you turn the key to position 0 in the
ignition lock or remove it, all the values
are reset after approximately 4 hours.
The values will not be reset if you turn
the key back to position 1 or 2 during
this time.
N54.32-2274-31