Filter
Top Products
313
Practical hints
Changing bulbs
5
Identification lamps 12V 4CP
(cargo vans only)
1 Securing screw
̈ Remove screw 1 and remove the lamp
housing.
̈ Press the bulb into the socket, turn it
counterclockwise and remove it from
the holder.
̈ Press the new bulb into the bulb holder
and screw it in clockwise.
̈ Carefully reattach the lamp housing
and retighten screw 1.
Entry lamp* W5W
1 Lamp housing
2 Bulb holder
3 Cable connector
̈ Press in the latching springs of lamp
housing 1 using a suitable tool, for ex-
ample a screwdriver.
̈ Pry off lamp housing 1.
̈ Remove cable connector 3.
̈ Turn bulb holder 2 in the direction of
the arrow and remove it together with
the bulb.
̈ Remove bulb 2 from the bulb holder.
̈ Press the new bulb into bulb holder 2.
̈ Screw bulb holder 2 together with the
bulb into lamp housing 1.
̈ Connect cable connector 3. The con-
nector’s locking spring must engage.
̈ Align lamp housing 1 and engage it.
N82.20-2081-31