Filter
Top Products
362
*Technical data
Service products and capacities
6
Coolants, lubricants, etc.
Service
interval
Product name/product number MB
sheet
MS-
No.
1
Air conditioning
The air conditioning system of your vehicle contains R-134a, a refrigerant that does not deplete the ozone layer in the upper atmo-
sphere.
Refrigerant R-134a — Refrigerant R-134a 361.0
Automatic transmission
Automatic transmission fluid 10 years
60,000 mi
(96,000 km)
MOPAR
®
05127382AB
Shell ATF 3403
Shell ATF 3353
236.10
236.12
Brakes
Use brake fluid approved for DaimlerChrysler standard MB 331.0 and/or DaimlerChrysler material standard MS-9971, brake fluid certified
to DOT 4 Plus standards, that also maintains a minimum dry boiling point (ERBP) of 500 °F (260 °C), a minimum wet boiling point (WERBP)
of 356 °F (180 °C) and a maximum viscosity of 1500 mm
2
/s, conforming to FMVSS 116 and ISO 4925.
Brake fluid 2 years
2
Intac B026E Dry boiling point: 500°F (260°C)
Wet boiling point: 356°F (180°C)
MOPAR
®
MS-9971 Part No. 04549625AC or equivalent
331.0 9971
1 DaimlerChrysler Material Standard-No.
2 Over the course of a brake fluid’s service life, its boiling point falls due to the continuous absorption of moisture from the atmosphere. If the boiling point of the
brake fluid is too low, vapor pockets may form in the brake system when the brakes are applied hard (e.g. when driving on long downhill stretches). This has a det-
rimental effect on braking efficiency, which could increase the stopping distance. This increases the risk of an accident. Have the brake fluid renewed every 2 years.