Filter
Top Products
189
Operation
Engine
4
̈ The following message is displayed for
the duration of the measurement pro-
cess:
N
Engine oil level Measuring in
progress
The following messages may be displayed:
Checking the engine oil level with the
dipstick
When the oil is being checked, the vehicle
must
ț be at normal operating temperature
ț be standing level
ț have been standing with the engine
switched off for at least five minutes
Diesel engine
1 Engine oil filler neck
2 Engine oil dipstick
N
Engine oil
level OK
̈ Do not add oil.
Engine oil
Add
1.0 quart
̈ Add the amount of oil
shown (୴ page 190).
̈ Check the engine oil
level again after a few
minutes.
Engine oil
Add
1.5 quarts
Engine oil
Add
2.0 quarts
Engine oil
level Reduce
oil level
̈ The engine oil level is
too high. Have the oil
siphoned off.
Eng. oil
lev. Turn
ignition on
for level
̈ Switch on the ignition
(୴ page 67).
Observe
wait. period
̈ Carry out another
measurement after
approximately 5 min-
utes when the engine
is at normal operat-
ing temperature.
̈ Carry out another
measurement after
approximately
30 minutes when the
engine has cooled
down.
Engine oil
level Not
when eng.
running
̈ Switch off the engine
and wait for approxi-
mately 5 minutes if
the engine is at nor-
mal operating tem-
perature.
i
Engine oil level display:
ț
quart(s)
in USA only
ț
liter(s)
in Canada only
N