Filter
Top Products
363
*Technical data
Service products and capacities
6
Service interval Product name/product number MB
sheet
MS-
No.
1
Engine cooling system
The use of aluminum components in Sprinter engines requires that anticorrosive/antifreeze specifically formulated to protect aluminum
parts be used. The factory-approved service products are suitable for Sprinter engines and can be mixed with the original anticorrosion/
antifreeze filled at factory.
The cooling system design and anticorrosion/antifreeze agent used stipulate the replacement interval for the coolant solution in your ve-
hicle. Please observe the replacement interval specified in the Service Booklet for your vehicle.
Failure to use MB 325.0 anticorrosion/antifreeze and/or equivalent to DaimlerChrysler material standard MS-9769 and/or failure to ad-
here to the specified replacement interval may result in a significantly shortened service life.
For coolant composition and water quality, contact your authorized Sprinter Dealer.
Coolant, anticorrosion/antifreeze
fluid
1st interval:
15 years or
180,000 mi
(288,000 km)
2
Sub-
sequent intervals: 5
years or 100,000
mi (160,000 km)
EURO Peak Coolant/Antifreeze
OLD WORLD INDUSTRIES
325.0
Zerex G05, The Valvoline Company 325.0
Zerex G48, The Valvoline Company 325.0
Glysantin G05, BASF AG
MOPAR
®
Part No. 05066386AA, or equivalent
325.0
Engine
Engine oil for gasoline engine M272 1 year or 10,000 mi
(16,000 km)
see “Engine oils” (page 350) 229.31, 229.3
229.51, 229.5
Engine oil for diesel engine OM642 2 years or 10,000
mi (16,000 km)
See “Engine oils” (page 350) 228.51
229.31
229.51
1 DaimlerChrysler Material Standard-No.
2 Follow the interval, time or mileage, that occurs first.