Filter
Top Products
87
ALERTS Alerts
Notice ẗẗ
Name Already Used!
When naming a waypoint, track, or route, you will see this
message if the name you enter is already being used. Select
“OK” to clear the message. Enter a different name.
Notice ẗẘ
Too Many Found.
Enter City.
When using Find to search for an address or intersection, you will
see this alert if too many entries are found. Select “OK” to clear
the message. Enter a city to narrow the search.
See “Navigation
Tools” page 24 for details.
Notice ẗẙ
None Found.
When using Find to search for an address or intersection, you will
see this alert if no entries are found. Select “OK” to clear the
message.
See “Navigation Tools,” page 24 for details.
ẗẗNotice
Name Already Used!
ẗẘNotice
Too Many Found.
Enter City.
ẗẙNotice
None Found.
Warning ẗẚ
Batteries Low!
This message appears approximately 30 minutes before your
batteries need to be replaced. Select “OK” to clear the message.
Replace the batteries as soon as possible. The message will
reappear every 10 minutes until the batteries are replaced or the
receiver automatically shuts off.
Notice ẗẛ
GPS is Off
Current Position Unknown
Turn GPS On?
This message is displayed any time an action is requested that
typically uses GPS satellite tracking (example marking a waypoint
or navigating a route). While GPS mode is set off, select “YES”
to turn GPS on. Select “NO” to have the GPS receiver assume
you are at your last calculated position.
ẗẚWarning
Batteries Low!
ẗẛNotice
GPS is Off
Current Position Unknown
Turn GPS On?