Cobra Electronics GPS 1000 GPS Receiver User Manual


 
PERFORMANCE
Receiver:
.............................12 parallel channels
Acquisition Time:................Approximately 8 seconds. (warm)
Approximately 38 seconds. (cold)
Approximately 45 seconds (first time)
Update Rate: ......................1/second, continuous (selectable)
Position Accuracy:..............up to 3 meters (10 feet)
Velocity Accuracy:..............0.1 knot / 0.1 km/h
Dynamics:............................Performs to specifications to 6 g’s
Antenna:..............................Built-in patch antenna
Internal Memory:...............4MB (megabytes) built-in
Expandable with SD card (optional)
PHYSICAL
Case:
....................................Fully gasketted, high impact ABS
plastic, waterproof to 1 meter for
30 minutes (IPX7 standards)
Size:.....................................6.1” H x 2.8” W x 1.3” D
(15.5 cm x 7.1 cm x 3.3 cm)
Weight:................................8.8 ounces (250g)
Operating Temperature:....5˚F to 158˚F (-15˚C to 70˚C)
Storage Temperature:........-40˚F to 176˚F (-40˚C to 80˚C)
POWER
Input:
...................................Two 1.5 volt AA batteries and/or
12-volt dc external power (vehicle
power adapter)
Battery Life:........................Up to 14 hours in battery
save mode.
Up to 10 hours in continuous
operation out of save mode.
APPENDIX
Specifications
6.6
Specifications
Specifications subject to change.
Temperature rating for this GPS receiver may exceed the usable
range of some batteries. Alkaline batteries can rupture at high
temperatures.
Alkaline batteries lose a significant amount of the capacity as
temperature decreases.
Use lithium batteries when operating this GPS receiver in below
freezing conditions.
Extensive use of screen backlighting will significantly reduce
battery life.
External power can be applied using the the Cobra Electronics
Corporation external power cord.