Filter
Top Products
To turn GPS off:
1.
On the System Page Ẅ, select “SATELLITES.” The Satellites screen appears ẅ, showing the satellite signals
being received with the signal strength of each indicated. The satellites that are currently acquired by the
receiver for navigation are highlighted.
2. Select “GPS STATUS.”
3. Select “Off” Ẇ. The receiver will immediately turn GPS off and stop receiving satellite signals.
4. Press the PAGE button to return to the System Page.
To turn GPS on:
1.
On the System Page Ẅ, select “SATELLITES.” A blank Satellites screen appears ẅ.
2. Select “GPS STATUS.”
3. Select “On” Ẇ. The receiver will begin searching for satellite signals from at least three satellites.
4. Press the PAGE button to return to the System Page.
SYSTEM PAGE
Satellites
4.1
73
Satellites
When indoors, you can turn GPS navigation off, allowing you to use the non-navigational features of your GPS receiver while preserving battery
power. When you turn GPS off, the receiver stops searching for signals from satellites. When you turn GPS back on to receive signals, the
receiver must re-acquire signals from at least three satellites before it can begin navigation.
ẄSystem Page
NOTE: The receiver must be outside with a clear view of the sky to acquire satellite signals for navigation.
page
ẅSatellites Screen
To highlight use
To select use
enter
p
esc
zoom
er
p
Highlight/Select
ẆOptions