Clifford 510.4X Remote Starter User Manual


 
10
© 2010 Directed Electronics. All rights reserved.
Advanced Commands: (Level 1)
Press and release the button 1 time. The transmit LED illuminates in
sets of single flashes to indicate Level 1.
Silent Arm
Press and release
The alarm arms, doors lock (if connected), and the parking lights flash
once.
Silent Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the parking lights
flash twice. The Silent Disarm output may be replaced by the Alarm
Report*
Runtime Reset
Press and release
If more time is needed while remote start is active, runtime reset will
reset the runtime counter to the pre-programmed setting.
Note
Remote Start must be On to use this feature.
AUX 1
Press and release
AUX
Activates (or if On, deactivates) the Aux 1 output.
* See Alarm Features for details.