Filter
Top Products
41
default values are set to be optimal in most cases.
Enable Overview mode
You can configure how the Overview mode is triggered when the next turn is at a distance.
The Route event distance will determine when Binatone Carrera switches to the Overview or back
The Overview zoom level will determine the fixed zoom level of the map in both automatic and
manually selected (by the Map orientation icon) Overview modes. You can change the zoom level
manually at any time (the Follow button will not be displayed), but when you enter the Overview
mode again, the zoom level will be reset to this value.
You can also move the map in Overview mode. Then the Follow button will appear, and when
pushed, it will move the map to have your current position in the middle again.
On the other hand you are not allowed to rotate the map in Overview mode. This mode is a strictly
north-up orientated mode.
Note: when this automatic feature is disabled, you can still enable the Overview mode manually.
Restore Lock-to-Position and Smart Zoom
As described at the hardware buttons and the map screen functions, you can move, rotate, tilt and
zoom the map during navigation. In these cases a Lock icon (Page 39) appears on the screen.
As already mentioned, you can move, tilt and zoom the map during navigation. In these cases a
Lock icon appears on the screen.
When you rotate, tilt or zoom the map, that part of Smart Zoom is automatically deactivated. The
map will still follow your position, but will not change the view parameter you have modified. You
can return to the full Smart Zoom mode by tapping the Follow button.
If you move the map, all parts of Smart Zoom become deactivated, and the view freezes. Tapping
the Follow button makes Binatone Carrera follow your position again (Lock-to-Position) and also
You can make Binatone Carrera push the Follow button for you automatically after a few seconds of
Restore Lock-to-Position
Turn this switch on if you want Binatone Carrera to return to your current GPS position after you have
moved the map accidentally, or if you have
After a certain timeout set below, the Follow button disappears, and the map immediately jumps
back to show your current position.
Restore Smart Zoom
Use this switch if you want Binatone Carrera to re-enable Smart Zoom after zooming, tilting or rotating
hanged the view accidentally, or you modified it to
quickly check something near your route.
After a certain timeout set below, the Follow button disappears, then Smart Zoom changes the view
back for navigation. Unlike with Restore Lock-to-Position, the view changes smoothly.
Note: Smart Zoom can only be re-enabled when it is activated at the top of this page. With Smart
to the Navigation view.
re-enables Smart Zoom.
inactivity. This functionality and the related parameters below apply to the Cockpit screen only. The
Map screen will wait for your action.
moved the map during navigation. This is useful if you have
moved it to quickly check something near your route.
the map during navigation. This is useful if you have c
MAIN ELEMENTS