Binatone C350 GPS Receiver User Manual


 
40
Power management : At the top of the screen you can set how the backlight will behave when the
screen has not been touched for a while.
• Backlight always on: You can choose to have the lights always on.
• Smart powersave: You can also initiate this special feature of Binatone Carrera. When running on
you press or tap a button, or if Binatone
the light level decreases, and after another
seconds the backlight turns off. This helps you achieve a longer battery life.
Brightness
You can set the backlight level separately for both daylight and night modes, thus enhancing the
effect of the night colour scheme.
The values are between 0 and 10, where zero means there is no backlight at all, and 10 represents
the maximum backlight value.
Smart Zoom
Smart zoom is a lot more than just a usual automatic zoom.
While navigating a route: when approaching a turn, it will zoom in and raise the view angle to let
you easily recognise your manoeuvre at the next junction. If the next turn is at a distance, it will
zoom out and lower the view angle to be flat in order to let you see the road in front of you, or it can
even switch to an Overview mode to let you follow your position on the map.
While cruising: if there is no active route and you are just driving, Smart Zoom will zoom in if you
drive slowly and zoom out to the limit set here when you drive at high speed.
These automatic features can be set up on this screen.
Smart Zoom settings
You can set how close Smart Zoom can zoom in when approaching the next turn (Zoom-in limit),
and the maximum zoom level to zoom out when the next turn is further away (Zoom-out limit). The
battery, Smart Powersave will light up the screen only when
Carrera has something to show you. After a few seconds
few
MAIN ELEMENTS