Filter
Top Products
20
Firmware Upgrade (advanced feature)
You can upgrade the firmware of the unit for better performance or/ and more functions. Follow the
steps below to do so.
Note 1: only advanced users are recommended to operate this feature.
Note 2: before upgrading, please make sure that the battery capacity if filled, or power the unit with
the car charger to ensure the upgrading will not be corrupted.
Note 3: do not remove the memory card during upgrading!
Note 4: please visit on www.binatonecarrera.com
website for more information.
1. Download the firmware file from our website. Uncompress the file and copy it to a SD/ MMC
memory card. Insert the card into the card slot of the unit.
2. Tap to enter this field; you will see the figure as the second below.
3. To start to upgrade, tap on the
button. The unit will restart automatically and the
“Upgrading…” message will prompt. In some seconds, “Finished!” message will prompt after the
upgrading is done.
4. If the upgrading is failed, you will see the below figure, shows “Failed!” message.
GETTING STARTED