Filter
Top Products
Apollo CNX80 Pilot’s Guide
2
Controls
Power/Volume
The knob at the top left corner of the CNX80 controls power on/off
and the radio volume. Push the PWR/VOL knob in to turn power on.
Pull the knob out to turn power off. When the power knob is pulled out,
a time-out message and counter will appear for five seconds. Turning
the knob will control the volume of the COM radio, unless the NAV
radio is active then the NAV volume is controlled.
COM
Select Com radio mode. Press COM.
VOR
Select Nav radio mode. Press VOR.
XPDR
Select the Transponder mode, if installed. Press XPDR.
CDI
Toggles the CDI indication between GPS and internal VOR/LOC radio
sources.
SUSP
Suspends or resumes flight plan waypoint sequencing. When waypoint
sequencing is suspended, the SUSP annunciator will be displayed in
the bottom left corner of the display.
MAP
Selects Map mode. Press MAP twice to view Map page 1.
Direct-To
Selects the Direct-To menu. Menu options allow setting up Direct-To
(D->), setting a customized holding pattern around a waypoint (Hold),
Course To (CrsTo) a waypoint, Course From (CrsFr) a waypoint, OBS
mode, and jumping to a given leg of your active flight plan (FlyLeg).
Bearings can be TO or FROM. Radials are only FROM.
NRST
Activates Nearest Waypoint Search. You can search through the clos-
est 20 of airports, NDBs, VORs, intersections, airspaces, user-created
waypoints, FSS, and ARTCC.
INFO
Activates Info mode for the highlighted waypoint or the TO waypoint.
CLR
Clears text when editing or deletes selected items depending on the mode.
Controls
CNX80 Pilot Guide 560-0984-00C Draft1.book Page 2 Tuesday, September 2, 2003 10:36 AM