Filter
Top Products
Apollo CNX80 Pilot’s Guide
18
Com Radio (COM)
Press COM to activate control of the internal Com Radio. All other func-
tions will continue to function normally, such as active flight plans.
Turn the PWR/VOL knob to control the Com volume.
Squelch (SQ)
Press the SQ key to toggle the Com receiver squelch function. When
squelch is active, the Squelch (SQ) annunciator will appear on the left
side of the active frequency display and the SQ function label will be
highlighted.
Monitor (MON)
Press the MON key to toggle the Standby channel monitoring function.
When Monitor mode is active, the MON annunciator will appear on the
left side of the standby frequency and the MON function label will be
highlighted.
Frequency monitoring allows you to listen to the Standby frequency
while the CNX80 monitors the Active frequency for activity. When
Active frequency receives a signal, you will hear the Active frequency
until its activity stops. The frequency monitoring function is inhibited
while you are transmitting.
Recall (RCL)
1. Press the RCL key to display the menu of Recent, User, or Emer-
gency frequencies.
2. Press the <SBY key to insert the selected frequency as the Standby
frequency.
3. Press the <A> key to insert the selected frequency as the Active fre-
quency and set the previous Active frequency as Standby frequency.
Recent
1. Press the Recent key to bring up a list of the last eight frequen-
cies used as the Active frequency.
2. Turn the Large knob to highlight a frequency.
3. Press the <SBY or <A> keys to insert the frequency.
4. Press the Menu/Enter key if no choice is desired.
User
1. Press the User key to bring up a list of the 100 User created fre-
quencies.
2. Turn the Large knob to highlight a frequency.
3. Press the <SBY or <A> keys to insert the frequency.
Com Radio
CNX80 Pilot Guide 560-0984-00C Draft1.book Page 18 Tuesday, September 2, 2003 10:36 AM