Filter
Top Products
Apollo CNX80 Pilot’s Guide
29
6. Select by Location
a. With the first character of the Identifier highlighted, press the
CRSR knob in. The whole Identifier field will be highlighted. Now
turn the Large knob CCW one turn to highlight the Location field.
b. Turn the Small knob to display the facilities in alphabetic
sequence.
Steps for Setting Up a Simple Flight Plan
1. Press the FN key (if necessary) and then the FPL key.
2. Press the NEW key. The waypoint database will be displayed. You
can choose to search for a waypoint by the identifier, facility name,
city, or waypoint type.
3. Select the Origin waypoint as described in Building a New Flight
Plan above. Press Menu/Enter.
4. Select the Destination waypoint. Press Menu/Enter.
5. Turn the Large knob to highlight the “Discontinuity.” Press CLR to
remove the Discontinuity. This creates a direct path between way-
points.
6. Select the final operation for creating this flight plan: Save or Exe-
cute. Press SAVE to store the flight plan in the Library for future use
or press EXEC to both save the Library plan and make the plan the
Active flight plan.
Flightplan
CNX80 Pilot Guide 560-0984-00C Draft1.book Page 29 Tuesday, September 2, 2003 10:36 AM