Filter
Top Products
Apollo CNX80 Pilot’s Guide
28
resolving any conflicts by turning the Large knob to highlight it and
then pressing the CLR key. Deleting a discontinuity results in a fix-to-fix
direct nav path between those waypoints.
Pilot Nav Legs
When the “Pilot Nav” message appears on a leg in your flight plan it
means the CNX80 will not provide guidance on that leg. You will have
to use other flight instruments or autopilot modes to fly the given pro-
cedure leg until intercepting the course to the next waypoint. Once
the intercept is complete the flight plan will sequence and begin pro-
viding guidance to the waypoint.
The CNX80 will go into Suspend mode when the current leg is a Pilot
Nav leg. Pressing SUSP again sequences you to the next leg in the pro-
cedure. As you arrive at the course the course deviation indicator will
begin to center and once again you may engage the appropriate NAV
mode on your autopilot or flight director.
Searching for Waypoints to Insert into a Flight Plan
The following steps describe in general how you can select a waypoint
for one of the points in a flight plan.
1. Press the FN key (if necessary) and then the FPL key.
2. Press the NEW key. The waypoint database will be displayed. You
can choose to search for a waypoint by the Identifier, Facility Name,
Location, or Waypoint Type.
3. Select by Identifier
a. With the first character of the Identifier highlighted, turn the
Small knob to select the desired character.
b. Turn the Large knob CW to the next character and select the
character by turning the Small knob.
4. Select by Waypoint Type
a. With the first character of the Identifier highlighted, press the
CRSR knob in. The whole Identifier field will be highlighted. Now
turn the Large knob CCW one turn to highlight the waypoint type
field.
b. Turn the Small knob to display the different waypoint types.
5. Select by Facility Name
a. With the first character of the Identifier highlighted, press the
CRSR knob in. The whole Identifier field will be highlighted. Now
turn the Large knob CCW one turn to highlight the Facility Name
field.
b. Turn the Small knob to display the facilities in alphabetic
sequence.
Flightplan
CNX80 Pilot Guide 560-0984-00C Draft1.book Page 28 Tuesday, September 2, 2003 10:36 AM