Filter
Top Products
Apollo CNX80 Pilot’s Guide
33
2. Select the desired leg of your flight plan with the Large knob
(WPTS smart key is highlighted).
3. Press the FlyLeg key to activate the selected leg.
E. Add Arrival Procedures (STARS)
1. Press the Arrival key in the Destination section.
2. Use the Large and Small knobs to select the runway, arrival, and
transition.
3. Press Menu/Enter.
F. Add Approach Procedures
1. Press the Appr key. Select the approach with the Large and Small
knobs, or the keys on the right side of the display. Press Menu/Enter.
2. Press the XPND (Expand) key to view all waypoints and legs in the
flight plan. Every waypoint, airway, procedure, and intersection is
shown with the bearing and distance of each leg. Verify the way-
points in your flight plan and resolve any discontinuities.
3. Press EXEC.
Vector To Final
When you are in the Terminal area, you may be directed to fly a vector
to final approach.
1. Press FN and then PROC.
2. Press VTF.
3. Follow the guidance from the CNX80 as the inbound course to the
Final Approach Fix (FAF) is now active.
Missed Approach
1. Press SUSP to deselect the suspend state (while the Missed
Approach point is the TO waypoint) and allow flight plan sequencing
after the FAF.
2. Follow the guidance of the CNX80 to the Missed Approach Hold Point.
3. If missed approach clearance differs from the published informa-
tion, use Direct-To and manual hold as required.
Flightplan
CNX80 Pilot Guide 560-0984-00C Draft1.book Page 33 Tuesday, September 2, 2003 10:36 AM