Filter
Top Products
Apollo CNX80 Pilot’s Guide
9
Panning (PAN)
The Panning feature of the Map mode allows you to check out the area
near your present position. You can activate the Panning feature by
pressing the PAN key or by pressing the CRSR button on the Small
knob when in Map mode.
The cursor starts at your present position when you start the Pan func-
tion. The crosshair cursor remains in the center of the map display.
Move the map around the crosshair by turning the Large (N/S) and
Small (E/W) knobs. A green line will be drawn between your present
position and the crosshair position. The range and bearing to the
crosshair from your present position and the Lat/Lon of the crosshair
position is shown at the bottom of the map display.
Range
Press the Range key to highlight the Range menu item. When Range is
selected, turning the Small knob will change the map range instead of
moving the crosshair.
MRK Create a User Waypoint at the cursor position.
Create a New User waypoint
User waypoints allow you to create unique waypoints not already
present in the database or to instantly mark your present position for
future reference.
1. While in the Pan function, press MRK.
2. Press Menu/Enter to save the displayed user name.
or
3. Create a name of your choice and add other information as desired
using the Small knob to change characters and the Large knob to
move the cursor. Press CLR to delete a highlighted character. Then,
press Menu/Enter to save the information.
Panning
CNX80 Pilot Guide 560-0984-00C Draft1.book Page 9 Tuesday, September 2, 2003 10:36 AM