Alpine NVD-A802 GPS Receiver User Manual


 
73-EN
ALPINE NVD-A802 68-06194Z86-A (EN)
EN
Remote Control Reference Guide for AV Head Unit
When you use the Alpine head unit with the monitor, you can
operate the AV head unit with the remote control (supplied with
NVE-N872A). Change the AUDIO/NAV. Switch, on the side of
the remote control, to AUDIO.
1 :/J
Push:
PLAY/PAUSE (IVA-W205/IVA-W200/IVA-D105/
IVA-D100/IVA-D310/IVA-D300/IVA-D901/IVA-
D900/CVA-1014/CVA-1004/CVA-1003)
Push: Changes the modes as follows:
Volume/Bass/Treble/Fader
(CVA-1005/CVA-1006/IVA-C800/IVA-C801)
Push hold: PLAY/PAUSE
(CVA-1005/CVA-1006/IVA-C800/IVA-C801)
Radio mode:
Preset Selection (C/B), SEEK UP/DOWN (@/A)
CD/MD Player/Changer mode:
Disc Selection (C/B), Music Sensor (@/A), BW/FF
(@/A Hold)
Tape Mode:
Program Sensor (C/B), REW/FF (@/A Hold)
2 VOL.
Volume Control
3 A.PROC.
Audio Processor
4 SOURCE
Source Selection
5 MUTE
Audio Mute
6 BAND
Radio Band Selection
7 FUNC.
This function button has the same function as the
following models:
CVA-1003/CVA-1005/CVA-1006/IVA-C800/IVA-C801.
8 OP/CL
Indash Display OPEN/CLOSE (only pressing MODE
button)
9 ;
Indash Display Angle LEFT(only pressing MODE
button)
! :
Indash Display Angle RIGHT(only pressing MODE
button)
" 9
Indash Display Angle DOWN(only pressing MODE
button)
# 8
Indash Display Angle UP(only pressing MODE button)
$ V.SEL.
Switching V.SEL
% Numeric Keypad
This numeric keypad has the same function of the
preset buttons (1 to 6) as the following models: CVA-
1003/CVA-1005/CVA-1006/IVA-C800/IVA-C801.
& AUDIO/NAV.
Switching AUDIO/NAV. Switch to AUDIO side.
( MODE
Operates 8 to # (Flashes the Status Indicator for 5
seconds.)
1
2
3
5
8
7
"
#
!
9
$
&
(
4
6
%