Alpine NVD-A802 GPS Receiver User Manual


 
57-EN
ALPINE NVD-A802 68-06194Z86-A (EN)
EN
System Information
The DVD-ROM’s version and the system status information are
viewable. Make note of this information and refer to it whenever
you contact Alpine Tech Support or an Alpine-authorized dealer.
1
Touch [System Information] on the
Information menu screen.
Select (highlight) “System Information” by tilting
the joystick and press ENTER.
The Software Information screen is displayed.
2
Touch [Status] to display the System Status
screen.
Press ENTER.
Software Information
Touch [Status] Touch [Software]
Press ENTER Press ENTER
System Status
a 2nd Car
Select this when you use the NVE-N872A navigation
system in a second vehicle. It provides the user with a
means to recalibrate the speed sensor information
once the navigation system has been installed in the
second vehicle. The user will have to drive for a while
for recalibration to be completed.
a
2
The Trip Information screen is displayed.
a Average Speed
The average driving speed while the vehicle has been
in motion since Trip information was reset.
b Overall Speed
The average travelling speed since the beginning of the
trip, including idle time.
c Maximum Speed
The maximum speed the vehicle has reached during the
trip. Can be independently reset from all the other readings.
d Driving Time
Total time the vehicle has been moving since the trip
was reset.
e Idle Time
Total time the vehicle is idle (not moving).
f Total Time
Total elapsed time of the trip, i.e., driving time plus idle
time.
g Odometer button
The total distance in the odometer changes to the
distance of trip A or trip B. While displaying the
distance of trip A or trip B, touch and hold the odometer
button for at least 3 seconds or press and hold ENTER
to reset the odometer.
h Maximum Speed Reset button
Press or touch to reset Maximum Speed.
i Current Speed
The current speed is displayed by the analog
speedometer.
j Odometer
Total distance travelled since the odometer was last
reset.
k Reset All
Resets all values to zero, including the odometer
(Total, Trip A and Trip B).
a
b
c
d
e
f
g
ih
k
j