Filter
Top Products
66-EN
ALPINE NVD-A802 68-06194Z86-A (EN)
Routing Method
You can change the way the system calculates a route.
Setting item: Routing Method
Setting content: Quickest Route (Initial setting) /
Shortest Route / Maximize Freeways / Minimize
Freeways / Minimize Toll Roads / Use Ferry
•For details on each route, refer to “Change Method”
(page 32).
Display/Volume
1
Touch [Display/Volume] on the Setup menu
screen.
Select (highlight) “Display/Volume” by tilting the
joystick and press ENTER.
The Display/Volume screen is displayed.
2
Touch the desired item.
Select (highlight) the desired item by tilting the
joystick and press ENTER.
Setting items:
Screen Adjustment / Nav Volume Adjustment
3
Touch the desired Item to change its setting.
Select (highlight) the desired item by tilting the
joystick and press ENTER.
Auto Zoom Map
You can set whether to display the zoom map or not when
approaching a maneuver point.
Setting item: Auto Zoom Map
Setting content: On / Off (Initial setting)
On: Zoom level is automatically adjusted depending
on distance to maneuver.
Off: Zoom level does not change.
Estimated Time
When the system calculates a route, it also estimates the time it
will take to the destination. Arrival (ETA) is displayed in the time
of the destination time zone (PST or EST,etc.), or Remaining
(ETE) is displayed as “to go.”
Setting item: Estimated Time
Setting content: Arrival (ETA) (Initial setting) /
Remaining (ETE)
Arrival (ETA):Arrival (ETA) is displayed in the time
of the destination time zone (PST or
EST, etc.).
Remaining (ETE): Remaining (ETE) is displayed as
“to go.”
•The time estimates are based on the average speed of
the vehicle. The Estimated Time will vary accordingly,
as the vehicles speed varies.