Filter
Top Products
58-EN
ALPINE NVD-A802 68-06194Z86-A (EN)
Navigation Simulation
You can watch a demonstration of the navigation system’s voice
and screen guidance by using this function. The vehicle position
icon will automatically move along the desired route showing a
simulation of how the navigation system functions.
Use this function only while the car is parked.
1
Touch [Navigation Simulation] on the
Information menu screen.
Select (highlight) “Navigation Simulation” by
tilting the joystick and press ENTER.
The Navigation Simulation screen is displayed.
2
Touch [Start], then [ ].
Select (highlight) “Start” by tilting the joystick
and press ENTER. Select (highlight) “
” by
tilting the joystick and press ENTER.
The drive simulation for the current route begins.
•When the drive simulation is activated, a DEMO icon is
displayed on the lower left side of the screen.
•When the drive simulation is activated, the map scale
and direction can be changed.
•The drive simulation can be activated only when a
destination has already been set.
• If the system detects that the vehicle is moving,
simulation mode will be stopped.
Satellite Information
The navigation system allows you to view dynamic location
information received from GPS satellites.
This feature is very useful for off-road users in establishing a
starting point before trekking.
1
Touch [Satellite Information] on the
Information menu screen.
Select (highlight) “Satellite Information” by
tilting the joystick and press ENTER.
The Satellite Information screen is displayed.
a Number of satellites received
Number of satellites received can be up to 12.
b Today’s date
c Elevation
Elevation is based on GPS elevation. Car icon moves
as elevation changes.
d Satellites received
Satellites from which you are receiving are displayed
green. Yellow indicates that your position is being
calculated.
a
b
d
c