Filter
Top Products
- 79 -
audio cassette adapter equipped with a cord and jack that you can plug into your laptop's
speaker jack, then put the cassette into your car's stereo cassette player. This will channel
CoPilot's commands through your car's stereo system if it's set to play audio tapes.
NOTE: Please don't drive with headphones on because this is unsafe!
When I try to run CoPilot I get a message that says “CoPilot Can't Find the Data
Disc”, and the program won't start. What can I do?
1. Is the Data Disc in the CD-ROM drive?
A. If yes, see question 2 below.
B. If no, place the Data Disc in your CD-ROM drive and try using CoPilot again. If
you are still having trouble once the Data Disc is in your CD-ROM drive, see question
2 below.
2. Is the underside (the side without artwork) of the Data Disc clean?
A. If yes, see question 3 below.
B. If no (you see lint or finger prints), you can clean the CD by using a soft, clean piece
of lint free material slightly moistened with water. Place the Data Disc in the CD-ROM
drive once it is dry and try using your CoPilot program again.
If you're still having trouble, see question 3 below.
3. Is CoPilot looking at the right drive when trying to read the Data Disc? To check, please
follow the instructions listed below:
A. First, we need to determine the drive letter of your CD-ROM drive. (If you already
know your drive letter, move to step B on the next page.)
To do this:
1. Go to your Start button/Programs/Windows Explorer. In the upper left hand
corner of your screen, you'll see a white box (it may have a drive displayed in it)
with a black arrow just to the right of the white box.