Filter
Top Products
PinPoint-E EDGE/GPRS - User Guide, version 2.32 77
AT Commands: Misc (Miscellaneous)
*DPORT=n
*HOSTPAP=n
*NETALLOWZEROIP=n
*NETPW=pw
*NETPHONE?
Examples:
ATS53=T192.168.100.23/12345
ATS53=foo.earlink.com
Telnet to the specified IP at port 12345.
ATS53=192.168.100.23/12345
Query the specified IP at port 12345.
ATS53=/12345
Query port 12345.
*DATE=[mm/dd/yyyy],[hh:mm:ss]
Sets and queries the clock in the unit. Either the date and time can be specified, or simply one
of the two can be specified in which case the unspecified value will remain unchanged. The
date and time are always specified 24-hour notation.
mm/dd/yyyy = month, day, year
hh:mm:ss = time in 24-hour notation
Note: The GPS will be used to set the time, in which case any date/time specified by this command will
be ignored.
The modem's Device Port which the modem is listening on for inbound packets/data/polls..
Can also be set with the command S110.
n=1-65535
Use PAP to request the user login and password during PPP negotiation on the host connec-
tion.
n=0 : Disable PAP request (Default).
n=1 : Takes user login and password from Windows DUN connection and copies to *NETUID and
*NETPW.
Allows the displayed IP address in *NETIP to end in zero (ex. 192.168.1.0).
n=0 : Do not allow
n=1 : Allow
The password that is used to login to Your Wireless Service Provider’s cellular network, when
required.
pw=password
The modem’s phone number, if applicable or obtainable.