Filter
Top Products
PinPoint-E EDGE/GPRS - User Guide, version 2.32 98
AT Commands: SMTP (including SMS)
This group includes commands specific to messaging.
FIGURE 1. Common : SMTP
SMTP (including SMS)
SMTP (Simple Mail Transfer Protocol) is the de facto standard for email transmission across the
Internet. The
PinPoint-E can send messages using SMTP if it has been configured to use a mail
server.
SMS (Short Message Service) is another way to send messages via Your Wireless Service Pro-
vider’s cellular network.
Caution: Your account with Your Wireless Service Provider may not support mes-
sage sending with SMS. For most SMS commands (those not proceeded by *),
you will need to have the modem in PassThru mode.
*SMTPADDR=[d.d.d.d][name][nom]
Specify the IP address or Fully Qualified Domain Name (FQDN) of the SMTP server to use.
d.d.d.d=IP Address
name=domain name
Maximum: 40 characters.
*SMTPFROM=email
Sets the email address from which the SMTP message is being sent.
email= email address
Maximum: 30 characters.
*SMTPPW=password
Sets the password to use when authenticating the email account (*SMTPFROM) with the server (*SMT-
PADDR).
pass= password