Filter
Top Products
PinPoint-E EDGE/GPRS - User Guide, version 2.32 67
AT Commands
• Required variable parameters are denoted with italicized text, example, Dn. The n is variable
and noted in the parameters column.
• Optional parameters are denoted with square brackets [ ].
• Most commands with parameters can be entered with ? to read the current value (for example,
AT&D? will respond with “2” if the default has not been changed).
• AT Commands are not case sensitive. A capital “E” is the same as a lower-case “e”.
• When you are using a terminal connection, if you enter a command which is recognized by the
PinPoint-E, it will respond with “OK”. If the command is not recognized, the response will be
“ERROR”.
• Those commands applicable only to certain model numbers of the PinPoint-E will be noted.
Caution: Symbols listed with commands, such as *, /, &, or ?, are part of the com-
mand and must be included. Commands with symbols other than * may require
PassThru mode.