Filter
Top Products
PinPoint-E EDGE/GPRS - User Guide, version 2.32 64
AT Commands
FIGURE 4. AceNet: Load a Template
Using Telnet Terminal Emulation
It is possible to communicate with the PinPoint-E across a TCP/IP network. Telnet provides a termi-
nal style connection to the PinPoint-E.
Most installations of Microsoft Windows come with a version of HyperTerminal (used here for
specific directions), but you can use any other Telnet application, such as Putty, Terra Term, etc.
Start>All Programs>Accessories>Communications>HyperTerminal
1. Choose a name for your connection, such as PinPoint-E or AirLink. The name and icon are
only for your own reference so you can find the connection at a later date (if you want to have a
connection saved for both local and remote, it is recommended the connection name reflect the
connection type (example, PinPoint-E Remote).
FIGURE 5. HyperTerminal: Connection Name
2. Select TCP/IP (Winsock) for Connect Using. If the modem is connected directly to your com-
puter’s Ethernet port, put in the host address of 192.168.13.31 or the *HOSTPEERIP. If the
modem is remote, the host address will be the current Internet IP of the PinPoint-E. Change
the port number to 2332 (default telnet port for the PinPoint-E).