Filter
Top Products
AUTO TRANS DIAGNOSIS - 01M
Article Text (p. 51)
1996 Volkswagen Golf
For Volkswagen Technical Site
Copyright © 1998 Mitchell Repair Information Company, LLC
Thursday, August 19, 1999 11:28PM
Outer ................................................ 7
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
4) Install upper circlip for support tube. See Fig. 58.
Install washer and needle bearing into large sun gear drive shell. See
Fig. 17. Install large sun gear drive shell. See Fig. 60.
5) Install small sun gear drive shell. Install small
planetary drive shaft with needle bearings. See Figs. 17, 61 and 62.
Using a screwdriver, lock small sun gear drive shell to large sun gear
drive shell. See Fig. 19. Install adjustment shim, washer and bolt on
end of small planetary drive shaft. Tighten bolt to 22 ft. lbs. (30 N.
m).
6) Ensure end play is .009-.014" (.23-.37 mm). If end play is
not as specified, recheck assembly or adjustment. See
PLANETARY CARRIER under COMPONENT DISASSEMBLY & REASSEMBLY.
Fig. 60: Installing Large Sun Gear Drive Shell
Courtesy of Volkswagen United States, Inc.
Fig. 61: Installing Small Sun Gear Drive Shell
Courtesy of Volkswagen United States, Inc.