Filter
Top Products
AUTO TRANS DIAGNOSIS - 01M
Article Text (p. 19)
1996 Volkswagen Golf
For Volkswagen Technical Site
Copyright © 1998 Mitchell Repair Information Company, LLC
Thursday, August 19, 1999 11:28PM
3) Remove all clutches with support tube, 2nd-4th gear clutch
plates, springs and spring caps together. See Figs. 17 and 18.
4) Lock drive shell in place by inserting a screwdriver
through hole of large sun gear into side of transaxle case. See
Fig. 19. Loosen and remove small planetary drive shaft bolt, washer
and shim. See Fig. 20. Remove small planetary drive shaft.
5) Remove large drive shaft and sun gear. Remove Vehicle
Speed Sensor (VSS) from transaxle case. Remove supporting tube and
one-way clutch circlips. Remove one-way clutch assembly.
6) Remove planetary carrier with dished spring. Remove
reverse brake clutch assembly. See Figs. 17, 20 and 21. DO NOT remove
input gear assembly, unless bearing or gear damage is present.
Fig. 14: Exploded View Of Oil Pan & Valve Body
Courtesy of Volkswagen United States, Inc.