Filter
Top Products
AUTO TRANS DIAGNOSIS - 01M
Article Text (p. 23)
1996 Volkswagen Golf
For Volkswagen Technical Site
Copyright © 1998 Mitchell Repair Information Company, LLC
Thursday, August 19, 1999 11:28PM
Fig. 21: Removing Planetary Carrier & Reverse Brake Clutch Assembly
Courtesy of Volkswagen United States, Inc.
FINAL DRIVE & TRANSFER GEARS
1) Drain gear oil. Attach INCH-lb. torque wrench to a 1 5/8"
(41 mm) socket wrench. See Fig. 22. Measure and record total roller
bearing turning torque of drive pinion gear. This measurement is
required for reassembly reference if roller bearings are reused.
2) Engage parking pawl. Using a 7/8" (22 mm) Allen wrench
socket, remove fastener nut. See Fig. 22. Remove dished washer, shim
and bearing.
3) Install fastener nut. Using Pressing Adapter (VW771),
thread tool until 1/8" clearance is present between bearing race and
fastener nut.
4) Pull input gear out until it bottoms in pressing adapter.