Univex TRAX353 GPS Receiver User Manual


  Open as PDF
of 132
 
Page 84
How Do I Use It?
In the top section of the screen you see information about the current route.
Theeldsonthisscreenarecontinuouslyupdatedwhileyoukeepthe
screen open.
Whenyouopenthescreen,alleldscontaininformationaboutreaching
yournaldestination.Tapanyoftheeldstoseedataontheviapoints
startingfromtherstonethroughthenaldestinationagain.
You have the following data and functions on this screen:
Name Description Function
Destination The upper part of this screen
shows your planned route as
a horizontal line. Its leftmost
point is the start of the route,
therightmostoneisthenal
destination, and you can see
yourviapointagsalongthe
line, spaced in proportion to
their distance.
Tapthiseldto
change the content
ofalldataeldstovia
point information.
Arrival
(Estimated
Arrival)
Shows the estimated arrival
timeatthenaldestinationof
the route based on information
available for the remaining
segments of the route. The
calculation cannot take into
accounttrafcjamsandother
possible delays.
Tapthiseldto
change the content
ofalldataeldstovia
point information.
Distance Left Shows the distance you need
to travel on the route before
reachingyournaldestination.
Tapthiseldto
change the content
ofalldataeldstovia
point information.
 previous next