Filter
Top Products
Page 103
How Do I Use It?
ColourProles TRAX353 is able to show the map and the menus in
different colours during the day and during the night.
Selectthecolourprolestobeusedineachmode,
and select the automatic or manual switching between
thedaytimeandnightcolourproles.
Elevation on 2D
Map
2D maps can also display 3D information. These
top-down maps can display elevation by colours and
shading.
Show Street
Names
Street names and POI icons can be disturbing on
the map during navigation. With this switch you can
suppress these map elements when TRAX353 is
following your position on the map. If you move the
map, both the street names and POI icons reappear
immediately.
Lane
Information
Some maps contain lane information to help you
position your car in the upcoming intersection.
This setting tells TRAX353 whether to display this
information at the top or at the bottom of the map.
Sound settings
You can adjust the sounds of TRAX353. Tap the following buttons: ,
. .
Button Description
Master Volume Use the switch to mute all sounds of the device and
then to re-enable them again. The position of the fader
determines the volume level.
Voice Guidance
Volume
The slider adjusts the loudness of voice prompts. In its
leftmost position, the voice guidance is suppressed; in
its rightmost position, the master volume applies.
Key Sounds Keysoundsareaudibleconrmationofeitherpressing
hardware buttons or tapping the touch screen.
The switch turns the key sounds on or off. Key sounds
are played at the master volume level.