Univex TRAX353 GPS Receiver User Manual


 
Page 66
How Do I Use It?
, , .
If via points exist in the active route, you cannot delete
the route immediately on the Route Information screen.
Tap
repeatedly until all via points disappear
and the
button appears. Tap it to cancel the
whole route.
Using Track Logs
TRAX353 can record the track (how your GPS position changed) that you
drive.
You do not need to select a destination and create a
route for this; you can also record your driving path while
cruising.
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen.
Recording the travelled path (creating a Track Log)
1. Start driving.
2. Tap the following buttons:
, , .
3. Start the recording: tap the
button.
You return to the map and you can continue driving.
4. Repeat the above steps, then tap
later to stop the
TIP
NOTE