Univex TRAX353 GPS Receiver User Manual


 
Page 54
How Do I Use It?
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Simple mode), or
, (Advanced mode).
2. By default, TRAX353 proposes the country/state and settlement
where you are. If needed, tap the button with the name of the
country/state, and select a different one from the list.
3. If needed, change the settlement:
• Toselectthesettlementfromthelistofrecentlyusedones,
tap the
button.
• Toenteranewsettlement:
1. Tap the button with the name of the settlement, or if you
have changed the country/state, tap
.
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
• Afterenteringacoupleofcharacters,thenamesthat
match the string appear in a list.
• Tap
to open the list of results before it
appears automatically.
4. Pick the settlement from the list.
4. Tap the
button.
5. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.