Trimble Outdoors SPSX51 GPS Receiver User Manual


 
SPSx51 Modular GPS Receivers User Guide 53
Setting up the Receiver 5
Mounting a pair of GPS receivers
To obtain a position and heading solution, you need to connect two receivers to make
one compact unit. A mounting bracket and interconnecting cable is supplied with the
SPS551H receiver. Set up the receivers, antennas, and cables as shown in Figure 5.7.
Figure 5.7 Installation setup for the SPS551H with another SPSx51 for position and heading
Dual-frequency rover antenna Dual-frequency rover antenna
SPS551H
SPSx51
Antenna cable
Marine heading
cable (P/N 57169-10)
Serial Port 2
Serial Port 2
SPSx51
DC power
Mounting bracket
(P/N 56830-00)
P/N 58957-05
SPS551H