Filter
Top Products
SPSx51 Modular GPS Receivers User Guide 113
Specifications 10
Communication specifications
Feature Specification
Communications
Port 1 (7-pin 0S Lemo)
Port 2 (26-pin D-sub)
1PPS (1 Pulse per second)
USB (On the Go)
Ethernet
Bluetooth
3-wire RS-232/CAN
Full RS-232 (through multi-port adaptor)
3-wire RS-232
Through adaptor cable
Through mutli-port adaptor
Through mutli-port adaptor
Fully-integrated, fully-sealed 2.4 GHz Bluetooth
1
module
1
Bluetooth type approvals are country specific. For more information, contact your local Trimble office or
representative.
Integrated radios (optional)
Channel spacing (450 MHz)
450 MHz transmitter radio power output
Frequency approvals (900 MHz)
900 MHz transmitter radio power output
Fully-integrated, fully-sealed internal 450 MHz (UHF), Tx, Rx,
or Tx/Rx
Fully-integrated, fully-sealed internal 900 MHz, Tx, Rx, or
Tx/Rx
12.5 KHz or 25 KHz spacing available
0.5 W / 2.0 W (2.0 W upgrade available only in certain
countries)
USA/CAN (-10), New Zealand/Australia (-20), Australia (-30)
1.0 W (30 dBm)
External GSM/GPRS, cellular phone support Supported for direct dial and Internet-based VRS correction
streams
Cellular phone or GSM/GPRS modem inside a TSC2 controller
Receiver position update rate 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz positioning (varies by
receiver model)
Correction data input CMR, CMR+, RTCM 2.0 (select RTCM 2.1), RTCM 2.1–2.3,
RTCM 3.
Correction data output CMR, CMR+, RTCM 2.0 (select RTCM 2.1), RTCM 2.1–2.3.
Data outputs NMEA, GSOF, 1PPS Time Tags