Filter
Top Products
E Real-Time Data and Services
160 SPSx51 Modular GPS Receivers User Guide
RT17 Streamed Data service
An RT17 service provides GPS observations, ephemerides, and other information, as
defined for that service. When a “client” connects to the service, all data flow is from
the receiver to the client.
Using the keypad and display to configure RT17 outputs
You can configure RT17 output during the base and rover setup using the keypad and
display. See Outputting corrections, page 67.
Using the web interface to configure RT17 outputs
You can configure RT17 output using the I/O Configuration menu of the web interface
of the receiver. Configure the stream to allow multiple client connections on a single
port, or restrict the stream to a single client connection. To allow only authorized
connections on the port, protect the output stream by requiring a password. See I/O
Configuration menu, page 91.
Login authentication
If you interface to the receivers using binary commands over serial communications,
you may need login authentication. This has been added to most receiver models that
run firmware version 3.30 or later.
If your utilities such as the WinFlash utility or the Configuration ToolBox software do
not work with the receivers running firmware version 3.30 or later, go to the Trimble
website and then download the latest versions of these utilities. If your own application
software no longer communicates with the receiver, please contact Trimble Support
for information about how to use the receiver in these cases.