Filter
Top Products
APPENDIX
C
SPSx51 Modular GPS Receivers User Guide 151
Adding Internal Radio Frequencies C
In this appendix:
Q Adding receive frequencies for
the 450 MHz internal radio
If you have the optional internal 450 MHz radio
in your GPS receiver, use the WinFlash utility to
add the relevant receive frequencies to the
default list of frequencies. To install the WinFlash
utility, see Installing the WinFlash utility,
page 162.
You can also use the web interface to add and
manage receive 450 MHz frequencies.
If you have a receiver with the transmit option,
Trimble must specify and configure the
(FCC-approved) transmit broadcast frequencies
at the factory. You cannot configure these
yourself. If extra Transmit frequencies are
obtained once you have your receiver, then
contact your local Trimble authorized dealer to
have the extra frequencies added. The dealer will
provide you with a Set file, which you can transfer
to the receiver using the WinFlash utility.