Toshiba LF546 Automobile Parts User Manual


 
91
6 F 8 A 0 9 3 4
Switch operation
Display example
Description
The switches at the bottom change.
( are shown.)
At the same time, the cursor appears.
(The item indicated by the cursor is
highlighted.)
Then push .
You can continue to change the setting item.
Push to change the selection
items.
: Selected item is scrolled up.
: Selected item is scrolled down.
When the desired item is selected, push
to set the item temporarily.
When you push , a message appears
to confirm whether the setting is OK or not.
If OK, push . If you want to redo the
setting, push .
Pushing cancels the setting operation
and exits the setting screen.
Changing the high/low alarm value
The following is an example to change the high alarm value from +105% to +103%.
Switch operation
Display example
Description
Select "H VAL" from the setting item
selection menu.
The currently set value (+105% in this
example) appears.
Then push .
The switches at the bottom change.
( are shown.)
At the same time, the cursor appears.