Filter
Top Products
152
6 F 8 A 0 9 3 4
Appendix 1
Factory default standard value table
Parameter names Default value(SI unit) Default value(US unit) Changed value
Excitation frequency Value(*1) Value(*1)
Flow direction NORMAL NORMAL
Display 1 m
3
/h gal/min
Display 2 m
3
B COUNT B
Display digit setting
(for Display 1 and Display 2)
1/1000 1/1000
Custom coefficient 1.0 1.0
Custom unit “ CUSTOM”
(Head of character string is
blank )
“ CUSTOM”
(Head of character string is
blank )
Range type
SINGLE SINGLE
Range 1 Value(*1) Value(*1)
Ranges 2 to 4 0.00 m
3
/h 0.00 gal/min
Hysteresis 3.0 % 3.0 %
Damping constant 5.0 s 5.0 s
Rate-of-change limit 0.0 % 0.0 %
Control limit time 0.0 s 0.0 s
Low cutoff 1.0 % 1.0 %
Display low cutoff LINEAR LINEAR
Manual zero 0.0 % 0.0 %
4−20mADC alarm output
4mA 4mA
Output low limit setting 4mA 4mA
Digital output 1 NO USE NO USE
Digital output 2 NO USE NO USE
DO1/DO2 active status NormOPEN NormOPEN
Digital input NO USE NO USE
DI detective level H LEVEL H LEVEL
Count rate Value(*1) Value(*1)
Pulse width setting mode AUTO AUTO
Pulse width 100 ms 5 ms
Preset count 00000000 00000000
Preset function HOLD HOLD
High alarm On/Off OFF OFF
High alarm value 0.0 % 0.0 %
Low alarm On/Off OFF OFF
Low alarm value 0.0 % 0.0 %
High-High alarm On/Off OFF OFF
High-High alarm value 0.0 % 0.0 %
Low-Low alarm On/Off OFF OFF
Low-Low alarm value 0.0 % 0.0 %
Self-diagnosis On/Off ON ON
Fixed value output OFF OFF
Fixed value current 4mA 4mA
Fixed value pulse 0 pps 0 pps
Password 000 000
LCD density adjustment 3 3
Switch position setting BOTTOM BOTTOM
*1 : Setting value by meter size please refer to the next list.