Filter
Top Products
103
6 F 8 A 0 9 3 4
9. Mag-Prover-Calibration
9.1 Calibration Items
When you check or calibrate the converter or check the excitation current, you have to change the mode to
the calibration mode.
You can check or change the zero and span of the converter and the excitation current value as described
below.
However, calibration is already performed when shipped from the factory. Do not perform
change calibration unless it is specificity required.
Items Function items Display example
9.2.1 0 % flow rate calibration
CAL 0%
9.2.2 50 % flow rate calibration
CAL 50%
9.2.3 100 % flow rate calibration
CAL 100%
9.2.4 Checking the excitation current output
EXC DSPL