Filter
Top Products
69
6 F 8 A 0 9 3 4
Switch operation
Display example
Description
When you push , a message appears
to confirm whether the setting is OK or not.
If OK, push . If you want to redo the
setting, push .
Pushing cancels the setting operation
and exits the setting screen.
● Changing the span
You can set the span value for each range.
The following is an example to change the span of Range 1 from 2.0 m/s to 100 L/min.
Switch operation
Display example
Description
Select "R1" from the setting item selection
menu.
The currently set span value of Range1
(2.00000 m/s in this example) appears.
Then push .
The switches at the bottom change.
( are shown.)
At the same time, the cursor appears.
Push to move the cursor to the digit
of the first unit.
Push to change the first unit.
Push to move the cursor to the
digit of the time unit.
Push to change the time unit.
Push to move the cursor to the digit
of span value.